Fast, easy and durable support systems for paving and decking.
Adjustable Aluminium Decking System for Terraces
Adjustable Aluminium Decking System for Terraces
Patent Application nos: GB1909689.0, GB1904312.4, GB1910218.5
Fully non-combustible aluminium decking system designed to be installed onto terraces and inset balconies.
Achieves Euroclass A2fl-s1 and A2-s1 d0 fire rating.
Comprised of aluminium deck boards and joists, with adjustable support pedestals in a huge range of sizes.
• Simple design makes installation fast and straightforward
• Powdercoated with Interpon D1036 Textura coating for unbeatable slip resistance
• Boards available in any specified RAL colour
• Excellent scratch and wear resistance, even in areas of high foot-traffic
• 30 year warranty, 60 year design life
ADB Aluminium Deck Boards
- Two deck board profiles available to suit differing span requirements
- Powder-coated in any standard RAL colour
- High quality board, will not dent easily
- Interpon D1036 Textura coating ensures scratch-resistance/durability
- No maintenance required
Hidden Fixing System
- Comprised of snap-on AluClip™ (patent pending: GB2009927.1) and screw
- Fixes boards via clamp mechanism, allowing thermal expansion/contraction of boards
- Creates a 7mm gap between boards for efficient drainage
- Black powder-coated, invisible between boards
- Allows boards to be removed and replaced for balcony install/maintenance access
ADS Aluminium Joist
- Three joist depths available to suit different applications
- Manufactured from incredibly strong and lightweight aluminium
- Large allowable spans
- Available in mill finish or powder-coated
Adjustable Pedestal
- Astec 3000 zinc-nickel electroplated steel, produces sacrificial layer which protects pedestal from corrosion
- Large height-range available
- Large base spreads weight, protecting surface
- Simple to install and adjust
System Assembly
AluClip™ Rapid Fixing Method (Patent pending, application no: GB2009927.1)
1. Clip onto side of board and snap into place by pressing on edge
2. Slide next board until it touches edge of clips (creates 7mm gap)
3. Fix in place using 30mm Decking Screws as shown
4. Clamp mechanism allows for natural expansion/contraction of metal
Why is this so important?
Because in December 2018, the UK Government introduced a ban on the use of combustible materials installed externally to residential buildings over 18 meters. Materials used must now comply with European Classification (Euroclass) A1 or A2-S1, D0 in accordance with BS EN 13501-1:2007+A1:2009. Learn more.
Technical
Allowable load
Uniformly distributed: >4.0kN/m², Concentrated 2kN
Board coating
Interpon D1036 Textura Powdercoating, available in any RAL colour
Pedestal material
Astec 3000 Zinc-nickel, Electroplated steel
Reaction to Fire (to EN13501-1)
A2fl-s1 and A2-s1 d0
Slip Resistance (Pendulum Test values)
58 (dry), 43 (wet)
Scratch resistance (Furniture Leg report)
No damage identified
Wear resistance (Footfall report)
No wear identified
For full technical specification, see datasheet
Decking Screw
3.9 x 30mm self-drilling decking screw for AluClip™
Cleat/Joist Screw
4.2 x 13mm MX6 screw for fixing joist to pedestals
Side Termination Profile
For terminating cut boards at the edge of decking
End Termination Profile
For terminating board ends
Starter/End Clip
For fixing down decking at the start and finish of areas
System Height Overview
Build-up for all applications: from as little as 75mm to as much as 615mm
Downloads
Datasheet - AluTerrace System for Terraces1 PDF 380KBSystem datasheet including build-up, component information and technical detail
Reaction to Fire Reports - AluTerrace2 PDFs 420KBClassification of Reaction to Fire Performance for RynoAluTerrace deck boards (any RAL colour) - in accordance with EN 13501-1:2018
Technical Drawings - AluTerrace System for Terraces3 PDF's 2.94MBTechnical drawings of RynoAluTerrace showing product dimensions and system assembly
CAD Drawings - AluTerrace System for Terraces3 DWG's 6.87MBCAD models of RynoAluTerrace decking system for terraces in DWG format
BIM Objects - AluTerrace System for TerracesBIM objects in Revit and IFC formats.
Install Guide - AluTerrace System for Terraces1 PDF 209KB
Opps & Maintenance - AluTerrace1 PDF 118KBStorage, handling and safety information for RynoAluTerrace aluminium decking systems
How to Order?
For help understanding which RynoTerrace system is the right one for your project, please contact Ryno on:
Request a Call
Or enter your details below if you would like us to contact you.
Sign up for Ryno Updates and offers
