The vertical closure allows for the creation of steps and vertical edges of the paved area. Fixed into the top rail, the vertical closure can work in all directions.

Find out more

Paving stops hold paving in place to ensure no movement can occur. Fixed into the top rail around the perimeter of the paving area.

Where very low build-up is required, top rail can be installed straight onto supports without a primary joist.

Find out more

For use where very little height build-up is available. Joist cleats are height adjustable, catering for falls, or to meet door thresholds while contributing as little as 3mm build-up. Manufactured from high-quality aluminium, with a wide base for spreading weight evenly.

Cross-spacers, t-spacers, and straight-spacers available to achieve a wide range of paving formats and consistent spacing between slabs, with 2 or 4mm spacer thickness available as standard (other thicknesses available on longer leadtime).

When full support is required for the desired floor finish, PaveBoard™ is the answer. Incredibly rigid and resistant to the elements, PaveBoard™ can simply be cut to size and placed on the flanges of the top rail to fully support the paving. It can also be bonded with tile adhesive in the traditional way, meaning that tiles down to 10mm thick can be installed!

Base shock pads can be installed under pedestal/support base to enhance acoustic properties, or to provide additional protection to the membrane.

For applications where the substrate requires lower point pressure, the 170mm circular spreader plate can be attached to the underside of the pedestal base