The drainage boards can be quickly and efficiently installed using the clip-in feature. This feature also allows for the removal of individual boards after they have been installed.

For prefabricated balconies, fixing points for craning on site are an important consideration. BalcaSmart Aluminium boards come with a 55mm wide fixing channel, perfect for bolting heavy-duty fixing eyes into without damaging the deck board. Once the balcony is fixed into its final position, the fixing point is simply removed and hidden by the clip-in channel.

Using material efficiently is one way we help to limit project costs.
Our aluminium decking boards are available in a range of profiles, with span potential from 600mm up to 1500mm. By selecting the optimum board profile based on the spacing of existing steel bearers, we ensure maximum material efficiency and effectively minimise your costs.

Drainage is a key consideration on bolt-on balconies. Our drainage boards have a drainage channel built into the board, enabling positive drainage whilst still maintaining rapid and simple install.
Water can be guided to a gutter at the front or back of the balcony. Gutters are designed specific to each project, to suit the balcony dimensions.
Drainage boards are available with spans of up to 1500mm, and like our other aluminium decking boards, they are easy to fit and can be removed independently post-install.

Ryno joist hangers have been designed for projects and scenarios where decking joists need to be hung within the existing balcony frame to provide additional support for the aluminium deck boards.
This simple component provides strength and stability to the deck area, without adding height build up. Ideal for balcony remediation and refurbishment projects.

The non-combustible isolating layer can be installed between balcony steels and aluminium sheets, to prevent galvanic corrosion from occurring.
A simple solution, but perfectly effective: cut to size and attach in place.

For enhanced slip resistance and surface durability, our UltraGrip™ finish can be used as part of the BalcaSmart™ Aluminium system.
Available in classic Anthracite Grey (RAL 7016).

The furniture anchor effectively secures outdoor furniture to prevent wind uplift and movement, as per guidance given in BS 8579:2020.
It takes seconds to install, simply slotting in between the aluminium decking boards. It can be removed and replaced just as easily.
Works with all Ryno aluminium decking boards.

Termination profiles are a great addition where that extra finesse is required to the edges of the deck area. They are installed at board edges and ends, concealing any cut edges and offering a very neat finish with a small trim visible from the top of the decking.
Profiles are manufactured from aluminium and are powder coated to match the decking boards.

The 'go-to' aluminium decking board for those projects with limited height build-up available.
At a height of only 20mm, the low-height board is perfect for catering to low door thresholds, without compromising on strength.

Aluminium decking systems can be ballasted under the system to increase its overall weight.

Find out more